# HP ProDesk 405 G6 (DAF92MB26B0 Rev B) – CPU upgrade to Ryzen 3 4300GE requires 32MB BIOS chip. Has anyone successfully swapped the 16MB chip for a 32MB one and flashed S27? — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/3895dc6f62b41be4

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-10-11 12:33 ingested 2026-10-12 02:38

[original source ↗](https://www.reddit.com/r/homelab/comments/1x3738b/hp_prodesk_405_g6_daf92mb26b0_rev_b_cpu_upgrade/)

## retained text



```
Hi r/homelab,

I’ve got an HP ProDesk 405 G6 Desktop Mini PC (motherboard DAF92MB26B0 Rev B) that originally came with an Athlon Gold PRO 3150GE and a 16MB BIOS chip (Winbond 25Q128JVSQ). I wanted to upgrade to a Ryzen 3 4300GE, which is officially supported on this model, but only with BIOS version S27.

The problem:

· Current BIOS is S25 (Ver. 02.23.00), which only supports 3000-series CPUs.

· S27 requires a 32MB BIOS chip. My board has a 16MB chip, so a simple BIOS update is impossible.

· After swapping in the 4300GE, I get the error code 7 red / 5 white (which HP documents as "ROM detected failure prior to video").

· I tried running HP’s Firmware Update utility, but it won’t cross-flash from S25 to S27, and it reports no change.

My research so far:

· On vlab.su, a user with a similar board (DA0F92MB6F0 Rev F) tried replacing the 16MB chip with a 32MB MX25L25673G and flashing an S27 dump. It didn’t work – they got 6 red / 3 white instead.

· Another user confirmed that S27 contains different SMU firmware for 4000-series CPUs.

· I’ve found a 32MB S27 dump for my board revision.

· My plan is to replace the 25Q128JVSQ with a Winbond W25Q256JVEIQ (32MB, WSON-8) using a CH341A programmer and a WSON8-to-DIP8 adapter.

My questions:

1. Has anyone successfully performed this exact swap on a 405 G6 (or similar HP mini PC)? If so, what was your procedure?

2. Besides the main BIOS chip, is there anything else that needs to be modified? I noticed there’s also a 4MB EC chip (MX25L3255E) on the board. Could that be involved?

3. Are there any specific steps needed when flashing the 32MB dump – e.g., preserving the board’s serial number, MAC address, or other descriptors? I’ve read that HP BIOS images often contain a descriptor region and ME region that might need to be transferred.

4. If the swap fails, are there any alternative workarounds (e.g., using a different CPU that works with S25, or modifying the S25 image to add 4000-series support)?

I have a CH341A programmer, a WSON8 adapter, and the 32MB dump ready. I’m willing to try, but I’d like to know if there’s a known working method before I risk bricking the board.

Any insight or experience would be greatly appreciated. Thanks!
```



document fetched 2026-10-12 00:32 · canonical https://reddit.com/r/homelab/comments/1x3738b/hp_prodesk_405_g6_daf92mb26b0_rev_b_cpu_upgrade
