# I power limited my two 3090s to 250W because of fan noise and now I am looking at replacing both with one card — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/582bd4e942dfe582

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-10-03 12:04 ingested 2026-10-04 02:38

[original source ↗](https://www.reddit.com/r/homelab/comments/1wwlkva/i_power_limited_my_two_3090s_to_250w_because_of/)

## retained text



```
The fans on my two 3090s spin up hard every time I paste a long log into Qwen3.5 122B-A10B. They stay fairly quiet while it generates and get loud during prompt processing, which with this model can go on for a while. Capping both cards at 250W barely changed generation speed and made them noticeably quieter, though the prompt processing, the loud part, got slower.

The model is around 70GB at Q4, so with 48GB of VRAM part of its experts sit in system RAM. My PSU has five 8-pin PCIe outputs, the two 3090s already take four, and a third card would need at least two. The unused 16-pin connector on it is part of why I started looking at the RTX PRO 6000 at all.

The PRO 6000 puts all 96GB on one board at 600W, which is more than my two capped 3090s draw now, though it can be power limited too. Last week I ran the 122B for an afternoon on the server version of it through HyperAI, and the long prompts came back after a much shorter wait than at home. That tells me nothing about noise or heat, which is half of why I want to change this setup.

Someone in another thread measured a GB10 box, the chip in the DGX Spark, at 65 to 70W through a twelve hour image training run and called it silent. The Spark's 273 GB/s is enough for generation on a model with about 10B active parameters. Its prompt processing is the weak part, since the GPU is small, and long prompts are what set my fans off now.

The two cards are still at 250W.
```



document fetched 2026-10-04 00:32 · canonical https://reddit.com/r/homelab/comments/1wwlkva/i_power_limited_my_two_3090s_to_250w_because_of
