# Done… For now at least — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/6d3b313295eb2229

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-09-21 10:38 ingested 2026-09-22 02:39

[original source ↗](https://www.reddit.com/r/homelab/comments/1wm95qz/done_for_now_at_least/)

## retained text



```
Finally got my gaming rig properly cooled and into my rack where it belongs: 9950X3D, 4090, 64GB CL30. Cable management needs work, but I still need to get my X520 in there so I’ll work on it then. Don’t want to use the PCIe slot so running a cable from the MiniSAS port that board has, and just plan to mount the card upside down on its bracket. 

Scored a good deal on a newer 3KVA UPS and battery, but had to move out my R330 and R630 to make space until I go 24U, I wasn’t really using them anyway, the R330 was a ProxMox playground and the R630 was for me to learn TrueNAS. 

The R730 8LFF is my main server so it got to stay.   
2x E5-2667 v4 (recently swapped in from R630, previously E5-2697 v4, half the cores but 1.1Ghz faster)  
256GB ECC @ 2400 (again stolen from the R630, previously 192GB @ 2133)  
4x 6TB and 4x 4TB SAS HDD  
1x 2TB NVMe and 3x 16GB Optanes

It’s running UNRAID for NAS, Plex for media and TV as there’s a WinTV card fitted. Still learning setting up the ARR’s, hasn’t been a huge priority as I’ve years of unwatched TV and films to get through already. 

In the back there’s an i7 Mac Mini server with 2x 256Gb SSD’s in RAID1, running ProxMox. That’s running my HomeAss and Homarr, and I’ve most recently been playing around with Wazuh on there for logging. It’s always on, whereas I turn the R730 off when I’m not using it.

Also in the back; an APC PDU that’s sending power to the TV/console setup downstairs, and my partners Mac Mini setup in the next room. They’re low power and I’m well within the spec of my UPS so didn’t hurt to put them on it too. I have the PDU controlled via HAOS over SNMP, using the Hue switches to turn the ports on/off as required. And an APC ATS so I can pull the UPS out of the loop without switching off the Unifi stuff. 
```



document fetched 2026-09-22 00:37 · canonical https://reddit.com/r/homelab/comments/1wm95qz/done_for_now_at_least
