# Raspberry Pi 4 - 2Bay Home NAS — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/8089eeecc222451e

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-11-03 17:20 ingested 2026-11-04 02:40

[original source ↗](https://www.reddit.com/r/homelab/comments/1xmyzx6/raspberry_pi_4_2bay_home_nas/)

## retained text



```
I am a game developer with homelabbing being my free time hobby.

A while ago I decided that I want a local NAS to escape from google photos. My previous setup consisted of a single Raspberry Pi 4 with a usb sata ssd (used for Samba, AdGuard, etc).

I thought it would be reasonable for me to just add one or two hdds and pack them into a nice enclosure. That's how the current project was born, heavily inspired by synology 2bay NAS form factor. The whole project took me a month of R&D.

My main constraints were

1. Raspberry Pi 4, which lacks PCI-E bus, therefore a bunch of USB-SATA adapters were used.
2. A1 mini with print bed of 180x180 mm, which resulted in quite a compact NAS overall.
3. General aesthetics, meaning only a single power cable, nice power button, lack of cables everywhere.
4. Acceptable cooling, my usage doesn't heat disks too much, but RPI requires some cooling, also some cooling margins are desirable.
5. Being as quiet as possible

I’m aware that a Pi 5 with PCIe (or any proper SATA controller) would perform much better than a stack of USB-SATA adapters. But for my personal photo dump, the current setup is more than enough. Also world's economy is too bad nowadays to afford Rpi5.

I've used two powered Ugreen USB-sata adapters along with 22pin sata extension cables. Those adapters support UASP with SMART, also reviews on Alza were nice.  
SATA SSD uses non-powered axagon USB-sata adapters. They were plugged into axagon powered usb hub which goes to raspberry pi usb via 180 degrees usb adapters from aliexpress.   
To save on space I was forced to remove the stock enclosures of usb hub and ugreen adapters.  
Disk trays feature spring-loaded latches.

On the back there is a classic DC 5.5 jack for a 12V8A power supply, it powers Ugreen hubs directly. It’s also connected to DC-DC 12->5v 5A converter for a raspberry pi, powered usb hub and cooling fans.  
I have only two cooling fans, one is 40x40x10 12v directed at rpi4, second one is 60x60x10 on the backplate. I've connected them both to a 5v line to lower the noise, cooling is still fine though.

Power button is connected to GPIO3 + GND with led pins to 5V + GND.

For now the case is printed in Elegoo PLA, just because it was hanging around. Maybe later I'll reprint a second version with ABS/PETG, but we’ll see.

Whole case is assembled using m3 threaded rods.  
Whole NAS size is 126x165x178mm.

So that's it. What do you think?
```



document fetched 2026-11-04 00:35 · canonical https://reddit.com/r/homelab/comments/1xmyzx6/raspberry_pi_4_2bay_home_nas
