# My homelab diagram. Always wanted to make one of these, finally did — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/c8c12352f5262a76

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-11-07 04:47 ingested 2026-11-08 02:39

[original source ↗](https://www.reddit.com/r/homelab/comments/1xpxs19/my_homelab_diagram_always_wanted_to_make_one_of/)

## retained text



```
First post here, I've been lurking for a long time. A few years ago I saw a diagram someone posted of their network, and I've always wanted to make one for my own setup. Finally got to it!

It all started with an old Synology NAS. I switched to TrueNAS about 5 years ago and started with Proxmox around a year after that, back then on different hardware. The current setup has been growing for at least 3 years now. Not much from the old setups survived except the data, which I migrated into the main pool.

Hardware:

* terra (main server): Ryzen 9 9900X, 64GB DDR5, ConnectX-3 10G, runs Proxmox
* terra's own SSDs: 500GB Samsung 980 for Proxmox and a 2TB Crucial P5 Plus for the LXC/VM disks
* storage: 7x 16TB Exos in RAIDZ1 with 2 old SATA SSDs as a special vdev mirror, plus a 1TB NVMe pool
* all storage disks are passed through to a TrueNAS VM via a SAS HBA, the chipset SATA controller and NVMe SSD
* OPNsense on a Lenovo thin client (i3-9100T, 12GB) with a dual 2.5G Intel NIC in LACP
* MikroTik CRS310-8G+2S+ as the core switch, only doing L2
* UniFi U7 Lite, a JetKVM for terra and a SLZB-MR4 for Zigbee/Thread
* FRITZ!Box 6660 Cable from the ISP (600/50 Mbit/s), with OPNsense set as exposed host

I would prefer to run the FRITZ!Box in bridge mode. The option is actually in the firmware, just completely hidden, so I exported the config, edited it to make the bridge mode setting visible and turned it on. It sort of worked: both the FRITZ!Box and OPNsense got an IP from my ISP, but the connection reset every 5 minutes or so, because I'm only supposed to have a single connection. So I changed it back and I'm still stuck with double NAT.

The network is split into LAN, DMZ, guest, IoT and MGMT VLANs, plus WireGuard for when I'm away. All services live in the DMZ and can't reach the LAN.

terra runs 24 LXCs and 3 VMs (TrueNAS, Home Assistant and an Android VM). Everything public goes through Traefik with authentik in front. The bigger stuff is Jellyfin with the \*arr stack, Immich, Paperless, Pelican for game servers, Matrix and Forgejo, with Grafana, Prometheus and Loki for monitoring.

For Grafana, I got to the point where most of the data I want to monitor ends up in Prometheus and Loki, but I haven't set up any dashboards yet... it's still kinda overwhelming.

Another thing I still want/need to fix is the special vdev on the two old SATA SSDs. I was just looking through the different options in TrueNAS and didn't really know what all the cache types meant, so I added an SSD to see what would improve. Didn't know I couldn't just remove the special vdev again, that was kinda dumb on my side. Once I noticed that a single dead SSD would take the whole pool with it, I had to either rebuild the pool or at least get my one drive of redundancy back. I was kinda lazy and just added a second SSD as a mirror instead of doing it properly. The problem is that I don't have enough space to back up everything for a rebuild. The important stuff gets backed up to Backblaze B2, but my media doesn't  -\_-

I got the rack second hand for 200€. Transporting that thing was way harder than expected, I kinda misjudged the size and weight.

What's in it, from top to bottom:

* a 3D printer with a filament dryer
* a 3D printed 1U mount with the OPNsense thin client and 4 keystone couplers, next to it we have the JetKVM
* the MikroTik switch
* a 1U brush panel for the cables
* a keystone patch panel
* terra in a 4U case
* a shelf with filament
* a Denon audio system (takes 5U including its shelf)
* more filament boxes
* an old 1U server at the bottom that isn't even plugged in, the hardware in it is too old to be useful

So yeah, the rack is half homelab, half filament storage.

Open to questions and suggestions!

EDIT:  
Since a few people asked how I made the diagram: it's a Python script that draws it from a YAML file with all my hardware and network info. I built it together with Claude, and it took a lot of iterations to get it to a point where I'm happy with it.

I put it on GitHub in case anyone wants to use it: [https://github.com/Goblinmine/homelab-diagram](https://github.com/Goblinmine/homelab-diagram)

Fair warning, it's not a polished tool. The layout is hand-placed for my network, so you'll have to move things around for yours. The repo has a `CLAUDE.md` though, so if you open it with Claude Code and tell it to make the diagram for your homelab, it asks you about your setup and adapts the YAML and the layout for you.

The icons are from dashboard-icons (homarr-labs).
```



document fetched 2026-11-08 00:30 · canonical https://reddit.com/r/homelab/comments/1xpxs19/my_homelab_diagram_always_wanted_to_make_one_of
