# Made a thingie (with help from Claude) — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/f438303f49a5eacd

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-09-26 12:30 ingested 2026-09-27 02:39

[original source ↗](https://www.reddit.com/r/homelab/comments/1wqpcjn/made_a_thingie_with_help_from_claude/)

## retained text



```
UPS to ESP32 connector to monitor all you various power supplies NOT near a computer.

*AI Disclaimer: Yes I used AI for some of the more tedious parts of this and it did help a lot, the board design, some of the trace routing, placement and such was done by me and finished with AI.  Software side is all AI but you can build your own thing.*

*Note: I could only pick one flare and this is both hardware AND software so I couldn't pick the AI option for "some hardware AI" or add "mostly AI software".  1*

Hey all, I had a problem that I couldn't "cheaply" solve with my UPS's (Uninterruptible Power Supply).  Monitoring the status of a UPS and its battery health, etc... can be annoying if you do not have a computer close by (i.e. I have one in my garage for opener and such) and came to find out the battery doesn't work anymore.

I dont really have any spare Pi's (and they are like $300 now), so I made this!  It’s USB to an ESP32 and it reports all the data about your UPS back using a ***NUT LIKE*** interface.  To be clear it does not RUN nut, but it sends a format that is compatible with any monitors you could be using.

I have the (or should have the) board files on there also, the BOM (Bill of Materials) is about $5 if bought in bulk so its a pretty cheap way to connect.

Also none of the programming fuses are blown in this process so you can basically plug any USB thingie you want and flash it with your USB cable to do, well...whatever you want.

The USBC connector is both UART (programming) AND power, the USBA connector is for whatever you want to plug into it.  I have got flash drives working (not a feature for me tho).

Just putting it all out there if people want to or have done similar.  So yeah, take a look, anything you think would be cool to add let me know.

[https://github.com/aronreid/ups-to-esp32](https://github.com/aronreid/ups-to-esp32)

Happy Homelabbing!

EDIT: Oh sorry I also left the GPIO pins left on the board so you can make it do other things like open/close the garage door.  Its all Home Assistant compliant and PeaNUT.  Also I have an add-on OLED screen that can be plugged in to show status / ip / etc... on the display itself.  
```



document fetched 2026-09-27 00:34 · canonical https://reddit.com/r/homelab/comments/1wqpcjn/made_a_thingie_with_help_from_claude
