# A homelab that does not yet live at home — retained record

> Retained reddit record from reddit:homelab.

Canonical: https://highsignal.app/data/records/f6d4941c724a42db

[← sources](https://highsignal.app/data)


source: [reddit](https://highsignal.app/data/reddit) (reddit:homelab)  published 2026-10-13 02:27 ingested 2026-10-14 02:41

[original source ↗](https://www.reddit.com/r/homelab/comments/1x4kyke/a_homelab_that_does_not_yet_live_at_home/)

## retained text



```
So I have always tinkered around the edges of self-hosting things and networking at home, but mostly left that stuff at work. I have always wanted to build a small rack so I can play around with multiple hosts as I was previously just running a single mini PC with Proxmox. 

I submitted a business case to the master of coin (wife), and was approved to commence procurement on the proviso that the lab will initially be used for testing things at work (it's definitely coming home).

I got hold of three Dell Optiplex 7090s and set about putting together this little guy.

* Intel Core i5 11th Gen (6C/12T)
* 16GB DDR4 RAM
* 256GB M.2 SSD

The rack itself is the open source 3D printable 'Lab Rax' project, printed on my Voron Trident over a weekend in PETG.

The 2U LCD Display is from the KWS project, just using their recommendations for the panel, but I kind of wish I went with a touchscreen.

Not shown is a Ubiquiti Flex Mini 2.5G 5-Port managed switch which was initially sitting in the front on a 1U shelf, but moved to the back to make room for the display.

Why a switch with 2.5G ports when the 7090s only have 1G ports?

Well...

I also picked up some M.2 A+E 2.5G cards to replace the WiFi cards that are installed in the second M.2 slot, and expose the port at the back in the spare spot above the onboard ethernet.

I thought this was a good plan, but for the life of me I have not been able to get any of the boxes to negotiate 2.5Gbps with the switch. Perhaps the cards I bought aren't great or are not what they say they are (Amazon), but they show up as I226 chips.

I am wondering if there is too much interference in the box as the M.2 slot is at the front so the ribbon cable has to span back to front... perhaps it needs some shielding?

If anyone has experienced a similar issue with these cards please let me know!

  
I think the first upgrade would definitely have to be RAM. 12 x 3 gives me 36 vCPUs for VMs which is fine for now, but I feel like 48GB of RAM is a bit tight.

Each box has a single 16GB stick, so there is space for another in each... if it weren't so expensive!
```



document fetched 2026-10-14 00:37 · canonical https://reddit.com/r/homelab/comments/1x4kyke/a_homelab_that_does_not_yet_live_at_home
