← sources

built two pi 5 field kits that pass messages between meshtastic, aprs, sms and iridium, and they deploy from gitlab ci like the rest of my lab

source: reddit (reddit:homelab)published 2026-11-17 11:17ingested 2026-11-18 02:41

retained text

my last post here was the asn one, this is what ive been building since. two identical boxes, tesseract and parallax. each one is a pi 5 in an ip67 case that takes a message off one network and puts it on another when theres no internet or phone network.

whats in each one:

\- pi 5 8gb with the active cooler, on a geekworm x1202 ups with 4x 18650 (about 50wh)

\- lilygo t-echo for meshtastic on 868

\- picoaprs v4 for aprs on 2m. its a whole radio with its own kiss tnc, so no sound card and no direwolf

\- lilygo t-call a7670e for 4g/2g and sms

\- rockblock mk2 (iridium 9602) on the pis uart for satelite, puck antenna outside the case

\- pi touch display 2, 7 inch, chromium kiosk with the dashboard

\- 12v inlet in the case wall straight into the x1202

\- all of it on three 3mm hdpe plates on m3 threaded rods

the software is go, one binary with sqlite, in docker compose. every radio is an interface and you set rules between them, so a text from a meshtastic handheld can go out over aprs, sms or the satelite, free radio first, satelite last, and it works both ways. it talks reticulum too. in september i had the two kits on seperate meshtastic meshes and got a message from one mesh to the other over aprs, then the same over sms (pics 3 and 4 are the two screens during that test). then they did two days on the meshtastic stand at the things conference in amsterdam.

the homelab bit: both kits deploy from gitlab ci like everything else here. a push to main builds the arm64 image and the deploy job pulls it on both kits. at home theyre on the lan, out in the field they sit behind a 5g travel router with a wireguard tunnel home so the same job still finds them. a watchdog probes every usb radio every 30s and resets the ones that wedge. the server side (the hub) is self hostable, mine runs on k8s.

stuff that bit me:

\- the pi 5 caps usb at 600ma unless you put PSU\_MAX\_CURRENT=5000 in the eeprom. the lte modem browned out on every transmit till i found that

\- kernel 6.8.0-1052 blanks the touch display 2, so the kits are pinned on 1051 and plain apt upgrade is banned on them

\- the iridium 9704 i had in there first put garbage on the uart at power on, the pi read it as console input and panicked. took console=serial0 out of cmdline.txt

still a prototype, it works on the bench, that we have proved. its all open source, and yes a lot of the code was written with ai tools, all of it gets run on these two boxes.

code: [https://github.com/meshsat/meshsat](https://github.com/meshsat/meshsat)

build guide with the plates and wiring: [https://github.com/meshsat/meshsat-fieldkit/blob/main/v1/BUILD.md](https://github.com/meshsat/meshsat-fieldkit/blob/main/v1/BUILD.md)



happy to answer questions

document fetched 2026-11-18 00:40 · canonical https://reddit.com/r/homelab/comments/1xyhvi7/built_two_pi_5_field_kits_that_pass_messages