HP EliteBook 840 G3 running Pi-hole at just 1–2 W? Looking for a sanity check
retained text
I've recently repurposed an old HP EliteBook 840 G3 as a dedicated Pi-hole server for my home network. **Setup:** * HP EliteBook 840 G3 * Intel i5-6300U, 8 GB RAM * Ubuntu 22.04.5 LTS * Pi-hole running 24/7 * Ethernet connection, Wi-Fi not in use * Laptop remains running with the lid closed It's working reliably, handling DNS for around 15–20 household devices. Out of curiosity, I connected the laptop's mains adaptor through a TP-Link Tapo P110 energy-monitoring smart plug. The results aren't what i was expecting. Over several days, the P110 consistently reported around 1 W, with occasional spikes to 2–3 W. The accumulated energy readings suggest an average of approximately 1.8 W. At £0.25/kWh, that would work out at roughly £4 per year in electricity. I've checked that the laptop battery isn't discharging to support the load. I've also looked into the P110's measurement hardware. The components appear reasonably capable, but I appreciate that accuracy at such low loads is uncertain. The display only reports whole watts, and the accumulated energy reading isn't independent verification. Even if the actual consumption were three times higher, we'd still be looking at around 5–6 W, which seems excellent for an older laptop. I'm not claiming I've established an accurate 1.8 W measurement. I'm simply interested in whether others have observed similarly low power consumption from older laptops used as lightweight Linux servers. **Has anyone measured comparable hardware using a more accurate power meter?** It's certainly made me think twice about buying dedicated hardware for simple always-on services when an old laptop can do the job perfectly well.
document fetched 2026-10-21 00:36 · canonical https://reddit.com/r/homelab/comments/1xalopu/hp_elitebook_840_g3_running_pihole_at_just_12_w