10" Rack PDU Recommendations
retained text
Hi, I’ve just built my first homelab, and I’m really happy with how it turned out. The one thing I’m still struggling with is power distribution. As you can see from the back/bottom of the rack, all the power adapters and cables are becoming a mess. I also have several small devices such as Raspberry Pis and a NanoPi R2S, so I need a combination of **230V Schuko outlets, USB-A, and USB-C power**. I’m located in **Germany**, so I’m specifically looking for a **10-inch rack solution for 230V / Schuko (Type F)**. Currently, I have: * GeeekPi 7.84" 1280×400 capacitive touchscreen * Minisforum GK41 * Raspberry Pi 4 * 3× Raspberry Pi Zero 2 W * TP-Link Omada ES210X-M2 switch * Mini PC firewall appliance * NanoPi R2S * Minisforum MS-01 * USB fan * LED strip Ideally, I need around **6 AC outlets, 3 USB-A ports, and 3 USB-C ports**. My first idea was to use **2× 10" 4-outlet PDUs plus a separate USB/USB-C charger**, mounted at the rear of the rack. However, space is very limited, and I would prefer to avoid adding several separate devices if possible. I’ve seen some compact 10" rack PDUs that combine AC outlets, USB-A, and USB-C, but most of them seem to be designed for the US market, and I haven’t found a good Schuko/EU equivalent. I’m also interested in **0.5U or rear-mounted solutions**, since I only have about **1U of usable rack space left**. I’d prefer a commercially made and properly protected solution rather than DIY mains wiring. Does anyone know of a good **10" Schuko PDU with USB-A/USB-C**, or another compact way of handling this cleanly and safely? Any recommendations or examples of your own 10" rack power setup would be greatly appreciated. Thanks!
document fetched 2026-09-15 00:38 · canonical https://reddit.com/r/homelab/comments/1wg1v0d/10_rack_pdu_recommendations