Help with setup to link two buildings with fiber
retained text
I am extending my home network to another building. In the past I've just used Cat6 in conduit to connect buildings close to each other and never had any problems. But I realize having that electrical connection is a bad idea. This building is also around 170 meters away in total trench distance so Cat6 would be stretched anyway. To do this I've been looking for options, mostly on fs.com, and the best I have so far is: - 185 meters of direct burial cable with four OS2 fibers terminated at both ends and with pulling eyes - 2x FS S3220-5M switches (5x 2.5GbE, 1x 10G SFP+) - 2x 1310nm 10km SFP+ modules The fiber is by far the expensive part here (over 600€) and what will be buried and hard to redo. So I am trying to get this right. Does this single-mode cable with redundancy (4 fibers instead of 2) sound good? The switches and SFP+ modules are much less money and easy to swap out later, but do these sound like good choices? I also looked at the Mikrotik CSS610-8G-2S+IN. It's twice the price and only has 1GbE ports, but does have 2 SFP+ slots in case I can to connect other fibers later and maybe the management software is better than the FS branded routers?
document fetched 2026-11-18 00:40 · canonical https://reddit.com/r/homelab/comments/1xyr087/help_with_setup_to_link_two_buildings_with_fiber