Is it possible to completely reset all SMART history on a 2010 HDD and make a used drive look unused?
retained text
I recently bought an old 1TB 7200 RPM HDD that was sold as new/NOS. The drive is from around 2010. Model: GB1000EAMYC Firmware: HPG3 Serial: WMATV8029980 HP OEM drive When I first powered it on, SMART looked essentially factory-new: Power-On Hours: 0 Power Cycle Count: 1 Start/Stop Count: 1 Load Cycle Count: 0 Power-Off Retract Count: 0 Reallocated Sectors: 0 Reallocated Events: 0 Current Pending Sectors: 0 Offline Uncorrectable: 0 Reported Uncorrectable: 0 Command Timeout: 0 UDMA CRC Errors: 0 SMART extended error log: empty SMART self-test history: empty The SCT temperature history also appeared to start with my first power-up. Lifetime min/max was initially around 27–28°C and then increased normally as the drive warmed up. Physically, the drive looks very clean and I don't see any indication that it has been opened. However, the packaging may have been resealed/repacked, and some exposed areas of the PCB/copper on the underside have slight darkening/oxidation. Of course, that could simply be from sitting in storage for \~16 years. My question is not whether SMART values in general can be reset. I know that some older drives can have SMART attributes modified/reset using vendor/service tools. For a drive of this generation, is it technically possible to reset ALL of the above — including power-on hours, power cycles, load cycles, SMART error/self-test logs and SCT temperature history — so cleanly that a heavily used drive would be indistinguishable from a genuine unused/NOS drive using normal ATA/SMART tools? Are there any other vendor-specific logs, firmware/service-area counters or commands I could check that are harder to reset and could reveal previous use? I'm currently running a full SMART extended self-test as well. I'm mainly trying to determine whether this is genuinely old NOS stock or a refurbished/used drive with its history professionally reset.
document fetched 2026-09-24 00:39 · canonical https://reddit.com/r/homelab/comments/1wob4p1/is_it_possible_to_completely_reset_all_smart