Claude Fable 5.2 designed three devices from short prompts, and the boards needed no circuit fixes
retained text
On November 9, Anthropic published a research post on asking Claude Fable 5.2 to design three devices: a USB-C speakerphone, a voice-assistant hub, and a handheld virtual pet. With minimal prompting, Claude wrote the specs, laid out the boards, designed 3D-printable enclosures, and wrote the firmware. Diode Computers then built the prototypes under Claude's direction. All three boards were manufactured from Claude's files with no back-and-forth, and the circuitry needed no fixes. The speakerphone still works after weeks of use, and the other two are also still in good working order. The catch is that these are early prototypes. They have not been through electrical validation, antenna tuning, thermal testing, or certification, and they were not designed for mass production. Engineers at Diode still had to physically build and test them, because Claude was not connected to the test equipment or the assembly machines. Anthropic also notes it has a commercial relationship with Diode. On Diode's internal PCB Gym benchmark, Fable 5.2 scored 69%, compared with 25% for Fable 5. On the public BenchCAD 2.1 benchmark it scored 83.5%, nearly double Fable 5.1. If you design hardware, is the useful part the board layout help, or getting a first prototype out the door faster? Source: https://www.anthropic.com/research/claude-electronics-design
document fetched 2026-11-12 00:23 · canonical https://reddit.com/r/ClaudeAI/comments/1xtjtsp/claude_fable_52_designed_three_devices_from_short