SAS Drives not spinning up
retained text
Hi All, I've rebuilt an old working system and am looking to connect some SAS drives up to it. The configuration for the drives are as follows: Corsair TX550M PSU LSI 9300-8I HBA Internal Mini SAS HD SFF-8643 Host Controller to 4 SFF-8482 Target SAS Hard Disk and SATA Power Breakout Fanout Cable Cablecc Internal Mini SAS SFF-8643 Host to 4 SAS 29Pin SFF-8482 Target Disk 6Gbps - Tried this as well with the same result So, long story short, I have the drives connected to the HBA and then the SATA power is connected to the breakout cable. When I power the system on the drives don't spin at all I have a OS drive that is a 3.5" SATA SSD and it is detected without issue. \*Edit\* I've asked copilot as well, it recommends that I use a Molex to SATA power adapter, is this a viable recommendation? Any help would be greatly appreciated
document fetched 2026-10-25 00:32 · canonical https://reddit.com/r/homelab/comments/1xdxnox/sas_drives_not_spinning_up