Power Limit test R9700 100w-300w llama.cpp
retained text
Many R9700 Pro cards probably have a very loud cooling system. So I wondered, how low can you put the power level to get it silent and how much performance do you loose? By default it is capped to 210w minimum power level. I know there is this [power\_limit\_removal](https://gitlab.com/fpsflow/power_limit_removal), which needs a patched kernel or similar. I let Qwen3.8-27B code a livepatch kernel module to remove the lower power limit. The graph shows the pp and tg for power levels from 100w to 300w. I'd say pp is approximately linear until 180w, tg only starts to drop below 140w. At 160w I can run the fan at 45% and it is audible but not annoyingly loud. I did the tests at -40mV GPU voltage. I actually did tests from -80 to 0mV at 140W limit and the values didn't change at all. I tested that model and not qwen, because it was simply a lot faster to test. I used a recent llama.cpp compiled with ROCm. So from 300w to 210w I loose 10%pp. Going to 160w I loose another 13%. TG stays within 5%. For most cases that's a sacrifice I might be willing to make while I sit at the desk...
document fetched 2026-11-20 00:42 · canonical https://reddit.com/r/LocalLLaMA/comments/1y0a6qr/power_limit_test_r9700_100w300w_llamacpp