← sources

Adding a 3rd 2.5" SATA drive to an HP ProDesk 400 G7 SFF – can I use the optical drive connection?

source: reddit (reddit:homelab)published 2026-09-27 13:34ingested 2026-09-28 02:40

retained text

Hi everyone,

I have an HP ProDesk 400 G7 SFF which I turning into a homelab mostly for streaming and for personal photos and video.

I have already expanded the storage by replacing the original 3.5" HDD setup with two 2.5" HDDs/SSDs in the 3.5" drive bay area.

To do this, I used the two available SATA data connections in the case/motherboard and split the existing SATA power connection so that I could power both 2.5" drives.

Now I would like to add a third 2.5" SATA HDD/SSD, but I have run out of the standard SATA connections.

The PC still has the original optical drive which I don't plan on using: HP HLDS DVDRW GUD1N

When I looked at the connections on the optical drive, I noticed that it uses a Slimline SATA connector, which I had never seen before.

So my question is:

Can I reuse the SATA connection currently used by the optical drive to connect a normal 2.5" SATA HDD/SSD?

My understanding is that I could potentially use a cable such as this one:

[https://www.amazon.es/dp/B009JXKQ9O/](https://www.amazon.es/dp/B009JXKQ9O/)

It appears to convert Slimline SATA to standard SATA, including both data and power.

Would this work for connecting a normal 2.5" SATA HDD/SSD to the optical drive's connection?

Or does the HP ProDesk 400 G7 SFF use a proprietary pinout/power arrangement for the optical drive, meaning I need a specific HP cable/adapter?

Am I better of adding a new disk through a pci to sata card? Where do I get power from though?

Any advice from someone familiar with this particular HP SFF would be greatly appreciated.

Thanks!

document fetched 2026-09-28 00:34 · canonical https://reddit.com/r/homelab/comments/1wrke22/adding_a_3rd_25_sata_drive_to_an_hp_prodesk_400