← sources

Help this homelab newbie with possible power issues...

source: reddit (reddit:homelab)published 2026-10-29 10:57ingested 2026-10-30 02:39

retained text

I very recently got a pi5 and started self hosting stuff like nextcloud and jellyfin/kodi. For the latter i found a 500gb sshd from my old Acer laptop and decided to use it as media storage.

I bought a cheap (8€) SATA-to-USB 3 enclosure and plugged it into my pi's usb 3 port; it immediately started clicking repeatedly connecting and disconnecting and looking online i found out that my pi isn't able to power up the sshd by itself, especially when it already has a nvme hat installed (which i use for my nextcloud storage).

So i bought an Acer USB 3 hub, powered it with an apple 20W adapter and plugged it into the pi. It worked, with a few clicking sounds at boot but I thought ok this can work for a while.

The main problem is that roughly 8 mornings out of 10**,** the clicking doesn't stop. I end up unplugging and reconnecting the drive repeatedly before it eventually works, and I have to mount it manually too. I'm getting tired of this and would like to fix it.

I am aware that the clicking is not good for the drive's health and thats why im writing this post - i also don't care much for the files inside as it's just films that i can download again.

I dont know if i should make a post dedicated to this other problem but i've also had intermittent issues with a wireless air-mouse ONLY when the SSHD is connected. It might be a 2.4ghz interference? idk

# Anyways my setup:

* **Host:** Raspberry Pi 5, 8GB RAM, Debian 12 (arm64)
* **Power supply:** Official Raspberry Pi 27W PSU
* **Boot/storage:** NVMe SSD via HAT, used for Nextcloud
* **HDD:** Toshiba MQ02ABF050H, 500GB, 5400 RPM SSHD
* **HDD Enclosure:** Generic SATA-to-USB 3 enclosure 
* **USB hub:** Acer USB 3 hub, powered by an Apple 20W adapter

# What I've tried / observed:

* The SSHD and its enclosure work perfectly on my Ubuntu laptop and the drive appears normally in the file manager.
* SMART tool reported an overall **PASSED** result, with no reallocated, pending, or offline-uncorrectable sectors. The drive has approximately 19,110 power-on hours and 234,564 load cycles.

Can anyone PLEASE help me, i'm willing to spend more money on whatever its needed for this setup to work.

Thanks!

document fetched 2026-10-30 00:39 · canonical https://reddit.com/r/homelab/comments/1xigsf7/help_this_homelab_newbie_with_possible_power