Safest way to convert a 2×14TB QNAP RAID 1 to JBOD/single disks without losing 8.8TB of data?
retained text
I'm currently running a QNAP TS-251 with 2×14TB HDDs in RAID 1, primarily storing media for my Jellyfin server (running separately on an Ubuntu machine). I've realised that RAID 1 is pretty unnecessary for my use case. Most of the media is replaceable, and I'd much rather have the full 28TB of raw capacity instead of being limited to 14TB. **Current setup:** * NAS: QNAP TS-251 * Drives: 2×14TB HDDs in RAID 1 * Usable capacity: 12.43TB (as reported by QNAP) * Used: approximately 8.8TB * Free: approximately 3.6TB * Main purpose: Jellyfin media storage, accessed over the network * I have a powered USB-to-SATA dock available. I'd like to get both drives out of RAID 1 and use their combined capacity, preferably as two independent volumes or JBOD. I'm also open to mounting both shares on Ubuntu and combining them with mergerfs. Ideally, I'd like to avoid buying another 14TB HDD just to temporarily store my media during the migration. **The migration approach I'm considering:** 1. Remove one drive from the RAID 1 mirror, leaving the QNAP running in degraded mode. 2. Connect the removed drive through my USB-to-SATA dock. 3. Reformat that drive and copy the 8.8TB of media from the remaining RAID member onto it. 4. Verify the copied data. 5. Reinitialize the QNAP using the remaining internal drive as a new single-disk volume. 6. Copy the media back from the external drive. 7. Reinstall the second drive and configure it as another independent volume. I understand this is risky because there would be periods without redundancy, and I'm looking at roughly 40–70 hours of copying. **My questions:** * Is this approach technically feasible on QNAP/QTS, or am I overlooking something? * Can I safely remove one member of the RAID 1 array and continue accessing the existing volume in degraded mode? * Is there a smarter way to accomplish this without copying 8.8TB twice? * Would you recommend two independent volumes with mergerfs over QNAP's built-in JBOD implementation? AI disclaimer: Yes I used AI to create this post. English is not my first language. The idea of how to do it is still mine and AI was used solely for checking my grammar and spelling mistakes as well as formatting.
document fetched 2026-10-21 00:36 · canonical https://reddit.com/r/homelab/comments/1xaovps/safest_way_to_convert_a_214tb_qnap_raid_1_to