My First Homelab - Hanami
retained text
Hello everyone, I figured I should share this here. This is my very first time setting up a proper homelab. Previously I've just used a RPi 4B connected to WiFi, but I eventually figured having a dedicated x86-64 system would make things a bit easier. I first set up this device in April 2025, and like any good homelab I've been upgrading it little by little ever since. Hanami is an HP EliteDesk 800 G3 Mini 35W powered by an Intel Core i5-7500T with 16 GB of DDR4. While nothing groundbreaking, when combined with Debian 13 and Docker it allows me to host a few of the essentials, like Navidrome, ntfy, qBittorrent, Home Assistant, Syncthing, Erugo, etc. I originally used a 2TB Seagate drive, but I opted to upgrade to a shucked 4TB via a custom caddy. Unfortunately I never got the proper screws though, so the caddy is a bit loose inside. Wire conduits and switch basket are custom 3D printed using an Ender 3 V3 SE and white PLA. The switch basket is screwed into a stud via two screws hidden in the top and bottom middle holes. The switch is then slid into it from the top. Temps are pretty good. I recently did a repaste regardless just to learn the process, and now it sits at around 37°C according to Beszel. My next plan for this project is to set up Mainsail within a container and to buy a dedicated EDID emulator so that I can use Intel AMT to manage UEFI settings without needing to be physically present. Please share your thoughts and critiques!
document fetched 2026-09-21 00:33 · canonical https://reddit.com/r/homelab/comments/1wl4n52/my_first_homelab_hanami