← sources

Update 2 on my ruggedized offline Wikipedia / knowledge terminal -- hardware is coming together

source: reddit (reddit:homelab)published 2026-10-10 19:57ingested 2026-10-11 02:40

retained text

It's been a little while since my last update, but I've made quite a bit of progress on this thing.

Last time, I was working on securing the battery and separating the higher-current wiring from the rest of the electronics. Since then, most of my attention has shifted to the other side of the case, where the Raspberry Pi and lower-current components live.

I've been designing and 3D printing more of the internal structure to give everything a proper place. The goal is to keep the components protected and accessible while making sure I can still take things apart when I inevitably decide to change something.

One of the bigger challenges has been cooling. I ended up going with a push-pull arrangement, with an intake fan directing air over the Pi's heatsink and two exhaust fans pulling air through the compartment. I also designed covers and vents to help direct the airflow and keep the fans away from the wiring underneath.

The fans are controlled through a relay connected to the Pi's GPIO, so they don't need to run constantly. I've done some initial testing, and things seem to be working pretty well so far.

I've also added an RTL-SDR to the build, which opens up some interesting possibilities for receiving radio signals. I've already been experimenting with it, although integrating everything into a usable interface is still on the to-do list.

On the software side, I've started working on making the device's resources accessible over its own Wi-Fi network. The idea is that I can use the built-in display or connect another device and access the offline resources through a browser.

There's still work to do, especially with the software, cable management, and a few remaining hardware changes. But it's getting closer to being the self-contained device I originally envisioned.

I'm also still finding excuses to improve my Blender and 3D printing skills along the way. I've lost count of how many times I've redesigned some of these parts.

As always, I'm open to ideas, especially for useful offline resources or capabilities worth adding.

document fetched 2026-10-11 00:33 · canonical https://reddit.com/r/homelab/comments/1x2ogyq/update_2_on_my_ruggedized_offline_wikipedia