hardware iDRAC in Dell R220 doesn't work (for me).
retained text
I installed the card as per [this video](https://www.dell.com/support/contents/en-au/videos/videoplayer/how-to-install-idrac-enterprise-card-on-a-poweredge-r220/6079796577001). Previously I was using the default on-board iDRAC *via* NIC2 with an IP address supplied by the Mikrotik router to which NIC2 was connected. So after installing the iDRAC module, I moved the cable from NIC2 to LOM1 (i.e., the ethernet on the iDRAC module) and expected it to pick up an IP address. Yes, I had configured it to do in the iDRAC settings, accessed after pressing `F2` during startup. It doesn't, and NIC2 no longer gives access to the on-board iDRAC. So adding the iDRAC module has actually killed iDRAC entirely on the machine. One point of difference is that during the video, an SD-card is plugged into the slot on the iDRAC module. Mine has no SD-card. Is this the problem? Does this SD-card hold the licence key? \[Later\] as there is no reference to a dedicated network port in the iDRAC settings, it seems that I've been sold a dud, without a licence. I'll have to see what the Ebay vendor has to say about that.
document fetched 2026-10-22 00:39 · canonical https://reddit.com/r/homelab/comments/1xbj1en/hardware_idrac_in_dell_r220_doesnt_work_for_me