← sources

HP Z2 G4 SFF dead after DisplayPort Pin 20 backdrive current.

source: reddit (reddit:homelab)published 2026-09-25 17:07ingested 2026-09-26 02:37

retained text

I made this prompt with the help of AI. There’s a TL;DR at the end. If there are better subreddits to post this in please let me know :).

Hey everyone, looking for a second opinion on diagnosing a dead corporate workstation.

Hardware Specs:  
\- Model: HP Z2 G4 Small Form Factor (SFF) Workstation (2019)  
\- CPU: Intel 8th Gen  
\- GPU: Running on Integrated Graphics (No dedicated GPU installed yet)  
\- PSU: Stock HP Proprietary 250W unit (Part Number: L08417-002 / Model: D16-250P1A)  
\- PSU Connectors: Proprietary 7-pin inline main power + two 4-pin CPU connectors

Pre-Context:  
The library i work at is undergoing a massive yearlong renovation on its main floor (started in July). Many pc’s and monitors had to be thrown out and sent to E-waste. The tech/reference guy I worked with had with had this pc in his possession, (untouched im its original box). I had never owned my own pc before so I asked if I could have it and he said yes.

Main Context:  
I recently received this PC brand new/untouched in its original box (and for free). It booted up completely fine the first time. I went out and bought an Insignia DisplayPort 1.4 cable because I didn’t a have any do cables. I plugged it into my Asus gaming monitor (24in 165hz 1080p) and back into the pc and pressed boot, which unfortunately caused a Pin 20 backdrive voltage issue. System is now completely dead and won't turn on. I tooled the shell off and tried like everything to no avail. Given that the PC sat unused in a box since 2019, my main theory (that I got from speaking with AI), is that the electrolytic capacitors in the PSU were already dried out/degraded from sitting, and the reverse 3.3V current from the non-VESA compliant DP cable easily popped a standby rail or diode, sacrificing itself. However, I'm trying to rule out if the current bypassed the safety circuits and fried the motherboard's display traces/Super I/O chip instead.

My Goals & Questions:

1. Is there a reliable pinout guide or jumper test for this specific HP proprietary 7-pin + dual 4-pin power supply so I can test the PSU rails with a multimeter before buying parts? (AI, Idk this stuff)
2. Budget is strictly under $50. If the PSU is dead, I'm looking to buy a cheap used L08417-002 pull on eBay or other online stores. Can I safely drop a low-profile dedicated GPU (like a GT 1030 or RX 550 with native DP) onto this stock 250W unit to play retro 2002-era games? Any insight on how these Z2 enterprise boards handle reverse DP voltage, or tips on testing this specific proprietary PSU, would be massively appreciated!

TL;DR  
I think I fried the psu from a pin 20 issue the day I got this pc, I just want a cheap graphics card with a displayport port on it and a cheap psu to replace the bad one to play retro games on this pc.

Edit: I’ve tried everything my under the sun to get it to boot, taken out the single ram, taken out the psu and put it back in, taken out the small metal battery, you name it. Whenever I plug in the power chord i get a small green light next to a small yellow button, I’ve done the button thing too. It gets the green light every time it’s plugged in so I know it receives power, it just will not boot up no matter what.

UPDATE: I ran even more tests, multimeter being one and another being unplugging p1/2/3. No BIST light. the PSU is dead

document fetched 2026-09-26 00:36 · canonical https://reddit.com/r/homelab/comments/1wq1w53/hp_z2_g4_sff_dead_after_displayport_pin_20